Industrial Pumps Positive Displacement Self Priming Centrifugal End Suction Centrifugal SAER Industrial (Non ATEX) Cast Iron Close Coupled AISI 316 Close Coupled Centrifugal with Stub Shaft Cast Iron Long Coupled AISI 316 Long Coupled Robuschi Process (ATEX) AISI 316 Closed Impeller AISI 316 Open Impeller AISI 316 Vortex Impeller AISI 316 Channel Impeller AISI 316 CC Closed Impeller AISI 316 CC Open Impeller AISI 316 CC Vortex Impeller Cast Iron Closed Impeller Thermoplastic/Chemical Multistage Hygienic Borehole/Submerged Phone: 01293 533 665 Email: enquiries@thepumpco.co.uk Home  I About Us I Industrial Pumps I Domestic Pumps I Enquiries I Links  End Suction Centrifugal - Close Coupled Stub Shaft Non ATEX - SAER MG Range   Centrifugal Pumps are the most common and well-established pumps on the market. They come in many different models and can transfer fluids with high efficiency over a wide range of flows and pressures. MG1-MG2 electropumps are of the single-impeller, single-block centrifugal type with rigid coupling, coupled to a standard B3/B5 form asynchronous motor. The coupling is obtained by means of a block with ball bearing on which the pump shaft is secured and integrated with a rigid coupling. The pump body is standardised in compliance with UNI-EN 733 ( DIN 24255) . The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping.  Summary of Features Compact, economic, space saving construction High efficiency pump Easy maintenance Low maintenance costs Standard mechanical shaft seal EN 12756 (DIN 24690) Motor unit and rotating element of the pump can be removed without disturbing the pump body in the system pipework Standardised pump body in compliance with UNI-EN 733 ( DIN 24255)  Applications Construction & General Industry Aviation Chemical & Petrochemical   Paper Marine  Operational Limits Flow rates up to 255 m3/h, pressure heads up to 98m at 2,950 1/min. Temperature of liquid pumped: -15C° to +120C°. Special versions on request. Maximum working pressure: 10 bar Maximum ambient temperature: 40C° (please, request verification for higher temperatures)  Materials of Construction Casing – Cast iron, Bronze, Stainless steel Impeller – Cast iron, Bronze, Stainless steel Mechanical Seal – Silicon Carbide/Tungsten Carbide vs Viton Shaft – Stainless Steel         The Pump Company Limited, International Business Centre, Spindle Way, Crawley, West Sussex RH10 1TG Tel: (0)1293 533665. Fax: (0)1293 533664 Registered in UK 3428736