Industrial Pumps Positive Displacement Self Priming Centrifugal J Series Varisco Thermoplastic Argal Side Channel Robuschi Jet SAER Electric SAER Engine SAER End Suction Centrifugal Thermoplastic/Chemical In-line Pumps Dosing Pumps Multistage Hygienic Borehole/Submerged Phone: 01293 533 665 Email: enquiries@thepumpco.co.uk Home  I About Us I Industrial Pumps I Domestic Pumps I Enquiries I Links  Self Priming Centrifugal - Jet - SAER M Range   The Saer M Range is a series of Jet pumps and has the characteristic of the nozzle and venturi being housed in the pump body. The fluid generated by the impeller is passed only in part to the outlet, the remaining fluid is recycled by means of the venturi system which is connected with in the pump body. This allows the self prime function. The Saer M Range is suitable for General water supply, pressurization of water by using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy and farm applications, water transfer and garden watering applications. Note: it is generally advisable to fit either a non-return valve or foot-valve to the suction.  Summary of Features Self Priming capabilities Available with built in injector or external injector for use in wells (cast iron only) Totally enclosed fan cooled motor (TEFC) Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit Motor protection to IP44 (available in IP55 upon Request) Winding Insulation to class F Standard Voltage: 230V-50Hz single phase, 230V/400V-50Hz three phase Other voltages and frequencies available upon request  Applications Industry Agriculture   Marine Water Handling  Operational Limits Capacities up to 10 m3/hr (3.6 m3/hr in stainless steel) Heads up to 69 meters (48m in stainless steel) Liquid quality required: clean free from solids or abrasive substances and non aggressive Maximum Temperature of pumped liquid -15°C to 50°C Maximum ambient temperature 40°C For higher temperatures please contact the sales office Maximum working pressure 6 bar Manometric suction lift up to a max. of 8÷9 meters  Materials of Construction Pump body in AISI 304 stainless steel/Cast Iron, motor support in die cast aluminum Impeller/diffuser in thermoplastic resin, on request in s/s, seal retaining disc in AISI 304 stainless steel Mechanical seal in graphite/ceramic Rotor shaft in stainless steel fitted with seal for life bearings         The Pump Company Limited, International Business Centre, Spindle Way, Crawley, West Sussex RH10 1TG Tel: (0)1293 533665. Fax: (0)1293 533664 Registered in UK 3428736